The archtype whirler
The construction of the arched type whirler assures a perfect vortex, even with low volumes of water which is ideal as a table water-filter with low water flux and the RO system (about 2 l of water per/min). The water flow or the vortex can be adjusted using a standard screwdriver from below through the water outlet opening itself.
Newly fitted filter cartridges allows for more flow at the beginning but will reduce after a while due to particles caught in the filter. This can be adjusted accordingly. The water flow has been set to maximum from the manufacturers.
Drinking water energized with Eggy Whirler
photographed on top of frozen water drops. Water drops of drinking water, energised with the Eggy Whirler, have been frozen and photographed digitally under the microscope. To compare with distilled water: there are very seldom crystalline shapes, messages, stars, etc. visible when we freeze distilled water drops.
|approx. 115g o. without packaging + adapter
|approx. 45mm without adapter
|V4A stainless steel
|approx. to 2 l/min, ideal 4-6 l/min
|M22x1 IG x M24x1 AG
|M22 x 1 AG have without adapter M24 x 1 – IG with including adapter
|Gemstones (E1) or Aquawhiler balls
|directly at the faucet, ideal after waterfiltering
|Scope of delivery
|Whirler, M22x1 IG x M24x1 AG Adapter, manual
|AW-888 can be cleaned in the dishwasher. Please remove seals and gemstones before.
|Min. operating pressure
|approx. 1 bar, ideal 3,5 bar