Filtration with integrated water whirling!
Building on the proven EM D premium, the EM Aquawhirler which has an has an integrated water whirler unit that consists of a high-quality PETGmaterial and is also bacteria-repellent thanks to the special coating, thus positively reducing bacteria contamination within the cartridge filter. The EM Aquawhirler filter cartridge is exclusively manufactured by CARBONIT® for Prime Inventions GmbH. It has a mechanical filter fineness of <0.7 microns and a very high chemical and physical adsorption to chemical agents. With the addition of about 5% EM-Ceramic EM = Effective Microorganisms) it receives a specific feature. The cartridge filter is ideal for those customers who cannot connect a water whirler at the faucet. By exchanging the filter you will always have a clean new water whirler which is integrated within the existing carbon block. Carbon Block: Fineness 0.7 my with 5% EM Filter performance About 90% of CARBONIT® NFP Premium Water flow: Approx. 3l/ min. Depending on the water pressure Temperature: For technical reasons, use only with cold water, protect from frost.
The cartridge filter must be replaced after 6 months (according to DIN 1988). Basically, 10,000 litres of water must be filtered within 6 months. However, earlier change may be necessary if the water flow is noticeably reduced. Earlier replacement is not a defect of the filter used, but an indication of increased presence of fine particles in unfiltered water.
This EM-Aquawhirler filter cartridge fits into the CARBONIT® filter units SANUNO, Vario-HP and Duo-HP as well as in the Prime Inventions filter devices.
|Flow rate||approx. 3 l/min (pressure depend)|
|Performance||approx. 10.000 liter|
|Filter fineness||0,7 µm|
|Packaging unit||24 pieces|
|Box||285 x 80 x 80 mm|
|Box PU 24 pieces||600 x 300 x 400 mm|
|Weight PU 24 pieces||approx. 16kg incl. box|
|Chaniging interval||6 months|
|Pollutant reduction||See certificate|
|Manufacturer||Carbonit® exclusive f. Prime Inventions|
|Pallet||24 Boxes x 24 = 576 pieces|
|Manufactured for||9 3/4“ Filter housing|
|Min. working pressure||approx. 1 bar, ideal 3-4 bar|
|Restrictions for use||Use only cold water – Not behind unpressurized boilers!|