The archtype whirler
The construction of the arched type whirler assures a perfect vortex, even with low volumes of water which is ideal as a table water-filter with low water flux and the RO system (about 2 l of water per/min). The water flow or the vortex can be adjusted using a standard screwdriver from below (after the aerator has been unscrewed) through the water outlet opening itself.
Newly fitted filter cartridges allows for more flow at the beginning but will reduce after a while due to particles caught in the filter. This can be adjusted accordingly. The water flow has been set to maximum from the manufacturers.
Drinking water energized with Eggy Whirler
photographed on top of frozen water drops. Water drops of drinking water, energised with the Eggy Whirler, have been frozen and photographed digitally under the microscope. To compare with distilled water: there are very seldom crystalline shapes, messages, stars, etc. visible when we freeze distilled water drops.
|Weight||approx. 115g o. without packaging + adapter|
|Length||approx. 45mm without Adapter|
|Material housing||V4A stainless steel|
|Performance range||ab 2 l/min (druckabhängig)|
|Connection thread||Ideal 3 l/min, Verwirblung ab ca. 1,8 l/min möglich|
|Anschlussgewinde||M22x1 auf M24x1|
|Packaging unit||1 piece|
|Optional connections||M22x1 to M24x1 external fine thread|
|Optional energyzing||Gemstones (E1) or Aquawhiler balls|
|Main locations||water filter, osmosis, caravan, yacht, hairdresser sink.|
|Scope of delivery||Whirler, M22x1 to M24x1 adapter, manua|
|Cleaning||WE-888 can be cleaned in the dishwasher. Please remove seals and gemstones before.|
|Min. operating pressure||approx. 1 bar, ideal 3,5 bar|