for softening and denitrificationof drinking and service water up to max. 30 ° C.

Lime and nitrate in the water are currently the biggest challenges in water treatment. Solutions with filter cartridges or reverse osmosis systems are very complicated and expensive. With the new NH-1 system, you can rid your well or domestic water of nitrate and reduce the degree of hardness to a reasonable level and in a very inexpensive way.

The two granules 20 liters for softening and 10 liters for denitrification are automatically regenerated regularly. Due to the large salt container, you rarely need to refill with salt.

NH-1 consisting of:

GRP pressure bottle, filled with high-quality ion exchange resin, cabinet housing for a salt supply of max. 70kg, volume-controlled central control valve type Clack WS 1 CI, integrated fine-cut valve,

Installation conditions::

Drinking or raw water connection - socket 230 V / 50 Hz - waste water connection - pressure reducer at> 6 bar - domestic water filter at the inlet - connection thread: 1“.

Optional connection set available (ASS-2)

Also available with other capacities or as a pure nitrate removal system. For further information please request datasheets.

Performance data  
For households up to 4-6 pers.
Capacity at 10°dH* 8.000 L
Kapazität bei 15°dH* 5.330 L
Capacity at 20°dH* 4.000 L
Nominal flow ** 2,4 m3/h
Nominal flow *** 0,8 m3/h
max. Raw water flow pressure 6,0 bar
min. Raw water flow pressure 2,6 bar
Pressure loss at max. Flow 0,6 bar
Salt consumption per regeneration 3,2 kg
Regeneration time 60 Min.

Physical data Cabinet housing  
Height Cabinet housing 1.140 mm
Width cabinet housing 320 mm
Deep cabinet housing 500 mm
Maximum salt supply 70 kg

Physical data GRP pressure bottle  
GRP pressure bottle 8“x35“
Resin content 20 liters of softening granule 10 liters of de-nitrating granules
Control head Clack WS 1 CI
Water connection 1“ AG
Wastewater connection 1 2 mm

Electrical properties and conditions  
Power consumption 3 Watt
Electrical connection 230/ 50/24 V
Max. Water temperature 30 °C
Weight of the entire system 30 kg

* until the next regeneration
** according to DIN 19636 (20 ° dH to 8 ° dH)
*** from 20 ° dH to 0.5 ° dH (40 BV / h)

Optional: ASS-2

ASS-2 Connection set 1“ for NH Plant
(softening and nitrate removal)
1x Hardness Cutlery (2-pack)
2x reinforced hose 1“ with union nuts Length
1.000mm (DIN-) DVGW tested
4x seals
1x drain hose length 2.000mm
1x overflow hose length 2.000mm 1x hose clamp

shortname: NH-1


We use cookies on our website

I understand


Prime Inventions GmbH
Gerkens Hof 11
33758 Schloss Holte-Stukenbrock
Fon: +49 (0) 5207 510 96 - 0
Fax: +49 (0) 5207 - 510 96 - 99
Email: info@prime-inventions.de